1. What is atmospheric pressure?
The atmospheric pressure acting on a unit area. The air pressure at 0°C and 45 degrees latitude at sea level is called 1 atmosphere, and the value on a mercury barometer is 760 mm Hg (equivalent to 101325Pa).
Pressure equivalence
2. What is vacuum?
Vacuum refers to a gas state in a given space that is below one atmospheric pressure, and is a rarefied gas environment close to an ideal state. In a vacuum environment, the number of gas molecules is extremely small, and the gas pressure is far below standard atmospheric pressure.
3. What are the basic units of vacuum?
Vacuum commonly uses Pascal (Pa) or Torr as the unit of pressure. There are many other units, and their conversion methods are as shown in the table below.
| a | bar | mbar | Torr | atm | psi |
Pa | 1 | 1×10-5 | 1×10-2 | 7.5×10-3 | 9.87×10-6 | 1.45×10-4 |
bar | 1×105 | 1 | 1×103 | 750 | 0.987 | 14.5 |
mbar | 100 | 1×10-3 | 1 | 0.75 | 9.87×10-4 | 1.45×10-2 |
Torr | 1.33×102 | 1.33×10-3 | 1.33 | 1 | 1.32×10-3 | 1.93×10-2 |
atm | 1.01×105 | 1.013 | 1,013 | 760 | 1 | 14.7 |
psi | 6.89×103 | 6.89×10-2 | 68.9 | 51.71 | 6.8×10-2 | 1 |
4. In what two ways can pressure be expressed? What is the difference?
Absolute pressure: the pressure measured with absolute vacuum as the reference, and it is the actual pressure generated by a liquid, gas, or solid.
Relative pressure: the pressure measured with local atmospheric pressure as the reference, also called gauge pressure, because it is commonly measured with a pressure gauge.
Zero reference
Absolute pressure: the zero point is absolute vacuum, and the value is always greater than or equal to zero.
Relative pressure: the zero point is local atmospheric pressure, and the value can be positive or negative. When the pressure is higher than atmospheric pressure, it is a positive value; when lower than atmospheric pressure, it is a negative value (called negative pressure or vacuum degree).
5. What are the five major elements of a vacuum chamber helium leak detection system?
①Test piece, ②Vacuum chamber, ③Vacuum pump, ④Helium mass spectrometer leak detector, ⑤Detection medium helium
6. Why use vacuum for detection?
All detection methods have a detection background, and the detection background affects detection accuracy. When there is no substance at all in a confined space, it is a vacuum environment.
7. Why choose helium as the leak detection medium gas?
① Helium has stable chemical properties and is an inert gas that hardly reacts chemically with other substances. This means that during detection it will not be adsorbed by pipe or vessel walls or react with materials in the detection system to interfere with the detection results.
② Helium molecules are small and can pass smoothly through tiny leak channels, so it can effectively detect minute leak points.
8. What is the basic composition of a helium mass spectrometer leak detector, and what is its working principle?
The helium mass spectrometer leak detector mainly works based on mass spectrometry analysis technology. Its ion source ionizes the gas entering the instrument, and helium (He) is ionized to form helium ions. Under the action of electric and magnetic fields, these ions are separated according to their mass-to-charge ratio (m/z). Since the mass-to-charge ratio of helium is fixed (the atomic weight of helium is about 4), helium ions can be precisely focused and detected.
When helium leaks into the leak detector, the intensity of the helium ion current changes. By detecting the change in helium ion current intensity, the instrument can determine whether there is a helium leak and can roughly estimate the leakage amount based on the signal strength. Moreover, because the helium mass spectrometer leak detector is sensitive only to helium, it can accurately detect the presence of helium in complex gas environments, thereby locating the leak point.
9. What are the leak detection test methods?
Common methods using helium as the detection medium:
(1) Sniffer leak detection method
Advantages: ① Can accurately locate the leak point; ② Helium can be recovered, with a high recovery rate; ③ Low cost; ④ Can meet various pressure requirements.
Disadvantages: ① Cannot obtain the overall leak rate; ② Easily affected by environmental background; ③ Requires manual operation, with a high false detection rate.</